The 3U MXP908 PXIe PCIe 4.0 NTB Peripheral Module is designed to create a flexible and scalable PXIe fabric solution using PXIe racks and components. The MXP908 enables the CPU module in the PXIe backplane to communicate and share IO devices with other PXIe systems, CompactPCI Serial systems, or standard Servers. Scaling out to larger systems with other PXIe chassis requires the MXP924 PXIe switch card.
PCI Express 4.0
The MXP908 is designed for PCIe 4.0 link speeds in the backplane and via the front panel PCIe cable port. It will auto negotiate to the highest speed supported (PCIe Gen4 - Gen1) by each component connected to individual port. This allows you to mix various generation of equipment without scarifying performance between high speed components.
PCIe Clustering / Networking
The MXP908 supports Dolphin’s extensive PCI Express Software libraries to create a powerful and reliable communication solution for applications that benefit from an ultra-low latency, high performance cluster interconnect. Dolphin’s PCI Express Software enables standard and embedded Linux and Windows network applications to benefit from PCI Express performance without modification.
The MXP908 can than be used to connect PXIe systems and allow CPU to CPU and IO Sharing between racks. The MXP908 can also be used in combination with the MXH930 PCIe Host Adapters to establish connectivity to standard servers. The MXS924 1 U Rack mount switch enables scale out to larger PCIe networks.
The MXP908 supports large reflective memory configurations and multiple multicast groups. Multicast can be utilized between CPU boards and IO devices in the chassis as well as to external equipment via the PCIe cable port.
PCIe Cable ports
The MXP908 module has a quad SFF-8644 PCIe cable connector to allow connectivity to external PCIe devices. Only two upper ports are available for connectivity. Both ports can be used as two independent x4 links or one x8 links. Each SFF-8644 connector has a protected 3.3V supply to support AOCs. The MXP908 is carefully designed for maximum copper cable lengths. Fiber optics extends this distance to 100 meters. More info on cable alternatives for the MXP908 switch.
The MXP908 follows the PXISA PXIE-1 rev 2.3 and PXISA PCIE-5 Hardware specification 1.1.