- 2.1.1. The eXpressWare drivers (IRM etc) fails to load after it has been installed for the first time.
- 2.1.2. Is the Network Manager and Node Manager used on VxWorks ?
- 2.1.3. Can SISCI applications be implemented as RTPs?
- 2.1.4. Is SuperSockets and the TCP/IP driver available on VxWorks ?
|
2.1.1. | The eXpressWare drivers (IRM etc) fails to load after it has been installed for the first time. |
| Please follow the procedure below to determine the cause of the problem. Verify that the adapter card has been recognized by the machine. This can be done as follows: If this command does not show any output similar to the example above, the adapter card has not been recognized. Please try to power-cycle the system according to FAQ Q: 1.1.1. If this does not solve the issue, a hardware failure is possible. Please contact Dolphin support in such a case. Check the kernel message log for relevant messages.
# dmesg | grep PXH
# dmesg | grep PVH
If the driver still fails to load, please contact support and provide the driver's kernel log messages.
|
2.1.2. | Is the Network Manager and Node Manager used on VxWorks ? |
| No, these utilities are not supported and is not needed to run SISCI applications under VxWorks. The configuration and management of real-time systems are made static and manual to avoid running tasks that may disturb real-time applications. |
2.1.3. | Can SISCI applications be implemented as RTPs? |
| No, RTPs are currently not supported. |
2.1.4. | Is SuperSockets and the TCP/IP driver available on VxWorks ? |
| No, SuperSockets and the TCP/IP driver is currently only available with Linux and Windows, please contact Dolphin for more information. |